CutCornerShape

Function

Common

fun CutCornerShape(corner: CornerSize) = CutCornerShape(corner, corner, corner, corner)

Creates CutCornerShape with the same size applied for all four corners.

Parameters


corner	`CornerSize` to apply.

Common

fun CutCornerShape(size: Dp) = CutCornerShape(CornerSize(size))

Creates CutCornerShape with the same size applied for all four corners.

Parameters


size	Size in `Dp` to apply.

Common

fun CutCornerShape(size: Float) = CutCornerShape(CornerSize(size))

Creates CutCornerShape with the same size applied for all four corners.

Parameters


size	Size in pixels to apply.

Common

fun CutCornerShape(percent: Int) = CutCornerShape(CornerSize(percent))

Creates CutCornerShape with the same size applied for all four corners.

Parameters


percent	Size in percents to apply.

Common

fun CutCornerShape(
    topStart: Dp = 0.dp,
    topEnd: Dp = 0.dp,
    bottomEnd: Dp = 0.dp,
    bottomStart: Dp = 0.dp,
) =
    CutCornerShape(
        topStart = CornerSize(topStart),
        topEnd = CornerSize(topEnd),
        bottomEnd = CornerSize(bottomEnd),
        bottomStart = CornerSize(bottomStart),
    )

Creates CutCornerShape with sizes defined in Dp.

Common

fun CutCornerShape(
    topStart: Float = 0.0f,
    topEnd: Float = 0.0f,
    bottomEnd: Float = 0.0f,
    bottomStart: Float = 0.0f,
) =
    CutCornerShape(
        topStart = CornerSize(topStart),
        topEnd = CornerSize(topEnd),
        bottomEnd = CornerSize(bottomEnd),
        bottomStart = CornerSize(bottomStart),
    )

Creates CutCornerShape with sizes defined in float.

Common

fun CutCornerShape(
    @IntRange(from = 0, to = 100) topStartPercent: Int = 0,
    @IntRange(from = 0, to = 100) topEndPercent: Int = 0,
    @IntRange(from = 0, to = 100) bottomEndPercent: Int = 0,
    @IntRange(from = 0, to = 100) bottomStartPercent: Int = 0,
) =
    CutCornerShape(
        topStart = CornerSize(topStartPercent),
        topEnd = CornerSize(topEndPercent),
        bottomEnd = CornerSize(bottomEndPercent),
        bottomStart = CornerSize(bottomStartPercent),
    )

Creates CutCornerShape with sizes defined in percents of the shape's smaller side.

Parameters


topStartPercent	The top start corner clip size as a percentage of the smaller side, with a range of 0 - 100.
topEndPercent	The top end corner clip size as a percentage of the smaller side, with a range of 0 - 100.
bottomEndPercent	The bottom end clip size radius as a percentage of the smaller side, with a range of 0 - 100.
bottomStartPercent	The bottom start clip size radius as a percentage of the smaller side, with a range of 0 - 100.